Mitsubishi Q62DAN Instrukcja Użytkownika Strona 55

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 144
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 54
2 - 22 2 - 22
MELSEC-Q
2 INPUT MODULE SPECIFICATIONS
2.17 QX72 DC Input Module (Positive Common/Negative Common Shared Type)
DC Input Module (Positive Common/Negative Common Shared Type) Type
Specifications
QX72 Appearance
Number of input points 64 points
Insulation method Photocoupler
Rated input voltage
5VDC
(+20/-10%, ripple ratio within 5%)
12VDC
(+20/-15%, ripple ratio within 5%)
Rated input current Approx. 1.2mA Approx. 3.3mA
Input derating None
ON voltage/ON current 3.5V or higher/3mA or higher
OFF voltage/OFF current 1V or lower/0.1mA or lower
Input resistance Approx. 3.3k
OFF to ON
1ms/5ms/10ms/20ms/70ms or less (CPU parameter setting)
1
Initial setting is 10ms
Response
time
ON to OFF
1ms/5ms/10ms/20ms/70ms or less (CPU parameter setting)
1
Initial setting is 10ms
Dielectric maximum voltage 560VAC rms/3 cycles (altitude 2000m)
Insulation resistance 10M or more by insulation resistance tester
By noise simulator of 500Vp-p noise voltage,
1
s noise width and 25 to 60Hz noise frequency
Noise immunity
First transient noise IEC61000-4-4: 0.25kV
Protection of degree IP2X
Common terminal arrangement 32 points/common (common terminal: 1B01, 1B02, 2B01, 2B02)
Number of I/O points 64 (I/O allocation is set as a 64-points input module)
Operation indicator ON indication (LED), 32-point switchover using switch
External connections 40-pin connector
Applicable wire size 0.3mm
2
(For A6CON1 or A6CON4) 2
External wiring connector A6CON1, A6CON2, A6CON3, A6CON4 (optional)
5VDC internal current consumption
85mA (TYP, all points ON)
(0.09A is shown on the rating plate of the module.)
Weight 0.13kg
QX72
QX72
DISPLAY
F L
01234567
89ABCDEF
01234567
89ABCDEF
5/12VDC
1.2/3.3mA
1: For the setting method, refer to the section 1.3.1.
2: When using A6CON2 and A6CON3, refer to Chapter 7.
Przeglądanie stron 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 143 144

Komentarze do niniejszej Instrukcji

Brak uwag