Mitsubishi FX2N Instrukcja Użytkownika Pobierz pdf (Strona 69)

BFM Assignment 7

7-5

-1RM-E-SET Programmable Cam Switch

< BFM #3: Command >

*4: When an ADJ command is executed, the absolute value of the resolver is written to the

EEPROM. Do not set the write-protect function of the EEPROM.

*5: BFM #13 to BFM #26 (setting of the automatic angle advance function) are also written at the

same time.

• When two or more FX

-1RM is connected and used for a main unit, the second command is

allocated to BFM #8003, the third command is allocated to BFM #9003.

It is similar to above-mentioned BFM #3 with the crack of each bit of BFM #8003, #9003.

Bit Description Remarks

b0 RUN Runs a program (on rising edge). Refer to Paragraph 7.1.

b1 PRG

Turns off output by PRG command (received on rising edge).

Refer to Paragraph 7.1.

b2 ADJ

Sets reference angle on rising edge in PRG mode.

Refer to Paragraph 7.4. *4

b3 Error reset Resets error information (received on rising edge).

Write instruction

in RUN mode

Writes modification of program contents of bank currently executed to

EEPROM (on rising edge). *5

Initialization of

BFM keep area

Initializes BFM keep area (on rising edge in PRG mode).

This command has priority over program protection actuated by code No.

Write instruction

in PRG mode

Writes keep area contents to EEPROM in PRG mode (on rising edge).

∼

Unusable

⎯

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 141 142

Brak uwag

Mitsubishi FX2N Instrukcja Użytkownika Strona 69